®
®
14200 E Colfax Aurora, CO 80011
303-367-9666 * Outside Metro Area 800-274-5499
Chevy K5/ Pickup/ Suburban Parts
Coil-Over Conversion kit developed by Off Road Ltd. This kit is designed to be a bolt on system, with some minor drilling and grinding required. When installed, the kit will provide 6" of lift to the front end of the vehicle. Included in the standard kit is a Front Axle Saddle System with integrated axle truss, new transmission crossmember, adjustable radius arms to allow for axle position, caster or pinion angle adjustment, upper shock mounts (not pictured) with integrated bumpstops, limiting straps, adjustable track bar and 13" travel coil-over shocks (reservoir are an option). Shown with optional brake lines.
Cross-over steering is required, but not included in the kit. The rear lift would have to be accomplished in the traditional manner using blocks, add-a-leafs or replacement springs or with our NEW 4-Link Suspension System
The kit fits vehicles equipped with Dana 44, Corporate 10 Bolt or Dana 60 front axles and utilizing SM465, TH350, TH400 or 700R4 transmissions with either a NP203, NP205, 208 or 241 transfercase.
We have added a bracket only kit to our line of coil-over conversions for the Chevys. We had many request for just the brackets, so we decided to offer just the brackets/tubing to those who want to finish the fabrication process themselves. Click here for more information.
GM Full Floating 14-Bolt 4-Link Suspension System
The rear 4-link kit was developed to compliment the front coil-over conversion. It is a modified wishbone arm arrangement and utilizes factory rear leaf springs in conjunction with revolver type shackles at both ends of the leaf springs. This combination allows for extended axle articulation without sacrificing towing and weight carrying capacity of the vehicle.
This rear kit, as with the front coil-over conversion, is designed to be a bolt on unit with minor drilling and grinding required. It locates off the existing spring pads and incorporates an over the top axle truss or saddle with all bar link points and lower shock mounts. This conversion system includes the axle saddle, upper shock mounts, lower control arms and upper wishbone, rear shackle hanger and front link mounting brackets with crossover brace (shown with optional revolver shackles). The lower arms are constructed of 1 3/4" x .250 DOM tubing utilizing 1" high strength heim joints at all ends. It is only designed at this time to fit the GM full floating 14-bolt rear axle.
For those retaining the use of the 208 or 241 transfer case, an optional slip yoke eliminator kit has been designed to compliment the amount of axle drop achieved with this rear system when used in conjunction with our optional high angle CV driveshaft.
Other optional items include a high angle CV driveshaft either with 3" or 3.5" tubing, emergency brake cables and brackets with necessary common yoke, revolver shackles and rear shocks.
Chevy K5/Pickup/Suburban Front Winch Bumper
The bumper is 2" and 1-1/4" O.D. x .120 wall DOM tubular framework with 1/8" plate between the tubes thus giving this bumper the traditional look with a bit of the pre-runner flair. The bumper fits high and tight for maximum approach angle clearance and comes equipped with D-ring loops and two light tabs. The winch of choice for this bumper is the Superwinch EP9. Other winch types and styles may fit.
$750.00 + Truck Frieght
Rear Bumper w/Swing Out Tire Carrier
Off Road Ltd (WIB-FAB) K5 Rear Bumper with Swing-Out Tire Carrier/D-Ring Mounts/HiLift Jack Mount Rear Bumper will handle up to a 37" tall tire. Comes with all mounting hardware/brackets.
Call or email with any questions or for pricing
78-91 Chevy K5 Interior Roll Cage & Rear Seat Mounts
