Tonno Covers
Tough Enough to stand on! Light weight and removes easy (60lbs). Smooth underside design.
3 Year Warranty (See Below)
ARMOR LID will be free from defects in material and workmanship for a period of three (3) years from the retail date of purchase. The gas struts are warranted for one (1) year from the retail date of purchase. This warranty only applies to the original purchaser and is nontransferable. Warranty must be claimed with original sales receipt for proof of purchase.
Exclusions
This warranty does not cover failure due to neglect, improper installation
including any modifications to installation hardware, operating the truck with
your ARMOR LID in the open position, alterations, addition of equipment, abuse,
accident, corrosion, normal wear and tear, lack of maintenance, and exposure to
chemicals that are not safe for plastics.
Incidental or consequential damage or loss of contents due to use, neglect, lack
of maintenance, misuse of ARMOR LID tonneau is sole responsibility of the truck
owner and operator. Paint wear to the truck bed can happen with any truck
tonneau cover and is the sole responsibility of the truck owner. Paint damage to
your truck is not covered under this warranty.
Disclaimer
In the event that your ARMOR LID tonneau is found to be defective under the
terms of this warranty, it is at the discretion of PTI Inc. to repair or replace
the defective part. All repairs are to be made by an authorized ARMOR LID
dealer. Transportation costs and labor are not associated with this warranty
claim.
Maintenance
Your ARMOR LID tonneau cover only requires periodic cleaning with mild car wash
soap. Only use cleaners, waxes, or products that are labeled safe for use on
plastics Avoid the use of any chemicals to clean your ARMOR LID unless labeled
safe for plastics Avoid use of abrasive type cleansers as they may dull the
finish.
The gas struts are self lubricating and should only be cleaned occasionally with a damp cloth. Premature seal failure will result if solvents or lubricants are used to clean struts.
The locking mechanisms only require occasional lubrication with lithium grease.
All installation hardware and fasteners must be checked
every so often for tightness.
Warning!!!
When in the closed position, tonneau cover must be locked and tailgate must be closed! Failure to do so could result in unexpected opening of the tonneau cover from sudden wind gusts, which could cause damage to the truck and/or your tonneau cover!